• M-tech (Thermal Engineering) from BTKIT, Dwarahat (Uttarakhand Technical University) in 2012 
• B-tech (Mechanical Engineering) from Tula‟s Institute, Haldwani (Uttarakhand Technical University) in 2010. 
• 12th from GIC Phoolchaur, Haldwani (Uttarakhand Board) in 2005.
• 10th from Vivekanand Higher Secondary School, Almora (Uttarakhand Board) in 2003. 

Currently working as an Assistant Professor in Nanhi Pari Seemant Engineering Institute (NPSEI) Pithoragarh (A constituent institute of Uttarakhand Technical University), from 27 September 2012 to till date.

Coming Soon

M.Tech Thesis Title: Spallart Allmaras Unsteady Flow Investigation of a Muffle Furnace using Computational Fluid Dynamics.
Supervisor: Professor Satyendra Singh
Description: Unsteady flow study of a Muffle Furnace by CFD tool will help to design and construct different furnace and to identify the Temperature and pressure Profile inside different dimensions and plane of the furnace. In the project Gambit2.3.16 is used for design and meshing, and fluent 6.3.26 is used for Computational Fluid Dynamics (CFD). The project consists of both steady and unsteady study of cylindrical object. 

B. Tech Project Title: Two Stage Evaporative Cooling System
Description: Evaporative cooling is a physical phenomenon in which the warm and dry air is cooled by water Evaporation as it comes in contact with water/moisture. Latent heat describes the amount of heat that is needed to evaporate the water; this heat comes from the water itself and the surrounding air. In the project we design an experimental setup by using cellular pads and cooling tower. 

B. Tech Project Title:Six Stroke Engine
Description: Under the hood of almost all modern automobiles there sits a four-stroke internal combustion engine. Now there has come a new technology that has the potential to changes the scenario i.e. 6 stroke engine. In this engine the basic process is same as 4 stroke engine except that 2 more strokes are added after exhaust stroke. In this engine instead of removing exhaust gases in exhaust stroke these are compressed to high pressure and water is squirted into the chamber which being converted into steam forces the piston down completing another 2 strokes. 

• Working as an Examination Controller at Nanhi Pari Seemant Engineering Institute, Pithoragarh from 15 May 2018 to till date. 
• Working as Mechanical Maintenance in charge at Nanhi Pari Seemant Engineering Institute, Pithoragarh from 16 April 2013 to till date. 
• Working as Sports in charge at Nanhi Pari Seemant Engineering Institute, Pithoragarh from 16 April 2013 to till date. 
• Working as in charge of Photographic Club at Nanhi Pari Seemant Engineering Institute, Pithoragarh from 5 may 2016 to till date. 
• • Working as Deputy Hostel Warden at Nanhi Pari Seemant Engineering Institute, Pithoragarh from 1 September 2016 to till date. 
• Worked as an Assistant Examination Controller at Nanhi Pari Seemant Engineering Institute, Pithoragarh from 1 June 2014 to 7 January 2016. 
• Organize Annual Sports Meet „GARZANA-13‟ and GARZANA-15‟ Nanhi Pari Seemant Engineering Institute Pithoragarh. 
• Worked as an Institute Advisory Committee and Organizing Committee at Seemant Institute of Technology, Pithoragarh in National Conference on Resent Advances in Sciences & Technology (NCRAST-2015) held on 22-23 August, 2015. 
• Worked as Session Chair in National Conference on Resent Advances in Sciences & Technology (NCRAST2016) held on 29-30 August, 2016 at Seemant Institute of Technology, Pithoragarh. 
• Attended a Faculty Development Program on „Management Capacity Enhancement Program‟ Sponsored by TEQIP III, Organized by ESCI at Port Blair held on 28 January to 1 February 2018. 
• Organized a workshop on „Computer Based Project Ddesign and Manufacturing Using Auto Cad‟ held on 13 April to 16 April 2018 at Seemant Institute of Technology, Pithoragarh. 
• Attended a Faculty Development Program on „Advanced Pedagogy and Management Capacity Building Training‟ Sponsored by TEQIP III, Organized by ESCI at Gangtok, Shikkim held on 21 June to 25 June 2018. 
• Worked as an Organizer in International Conference on Big Data and Computational Intelligence (ICBDCE2018), at Nanhi Pari Seemant Engineering Institute, Pithoragarh, held on 9-10 February 2018 
• Active member of Accommodation and Audio Visual Committee at Nanhi Pari Seemant Engineering Institute, Pithoragarh in National Conference on Resent Advances in Sciences & Technology (NCRAST-2017) held on 11-12 November 2017 
• Worked as a Class Coordinator in Nanhi Pari Seemant Engineering Institute, Pithoragarh. 
• Actively participated in Tech Fest and Sports Meet in Graduation level. 
• Actively participated in extracurricular activity like sports, science exhibition at school level. 

1. Nitesh Verma, Dr. Satyendra Singh, ‘Study on Mechanical Behaviour of BHIMAL FIBER Reinforces EPOXY COMPOSITE” International Journal of Scientific & Engineering Research (IJSER), ISSN 2229-5518, Volume 8, Issue 12, December-2017. 
2. Surya Prakash Chauhan, Nitesh Verma, “Analytical Study and Design of Thermal Power Plant” International Journal of Enhanced Research Science Technology & Engineering, (IJERSTE), ISSN: 2319-7463, Vol. 4 Issue 6, June 2015. 
3. Nitesh Verma, Surya Prakash Chauhan, Kundan Singh Deshwal, “Spalart Allmaras Unsteady Flow Investigation Using Computational Fluid Dynamics for Drag and Lift Force of An Airfoil” in International Journal of Scientific & Engineering Research (IJSER), ISSN 2229-5518, Volume 7, Issue 12, December-2016. 
4. Nitesh Verma, Dr. Satyendra Singh, “Spalart Allmaras Unsteady Flow Investigation Using Computational Fluid Dynamics” International Journal of Engineering Research & Technology (IJERT), ISSN 2278-018, Vol. 1 Issue 7, September 2012. 
5. Nitesh Verma, Kundan Singh Deshwal, Bhupender Kumar Bharti, Munna Singh, “ A Review Paper on polymer Nano-Composite using Epoxy Resin” in National Conference on Recent Advances in Science and Technology (NCRAST),PP 252-255, August 2015 SIT Pithoragarh.
6. Kundan Singh Deshwal, Nitesh Verma, Munna Singh, “ A Basic Study on Tensile Testing Technique for Different Material” in National Conference on Recent Advances in Science and Technology (NCRAST), PP 302-303, August 2016 SIT Pithoragarh.

Assistant Professor
Department of Mechanical Engineering,
Nanhi Pari Seemant Engineering Institute Pithoragarh
Uttarakhand, India, 262501

Email 1 // [email protected]
Email 2 // [email protected]
Phone 1// +91-9897722098
Phone 2 // +91-7060022345